Asked By: Joshua Bell Date: created: Aug 03 2022

What are the advantages and disadvantages of belt and chain drives

Answered By: Matthew Carter Date: created: Aug 06 2022

Advantages and disadvantages of chain Drive over belt and rope drive

  • No slip and creep during the power transmission, it ensure the perfect velocity ratio.
  • High transmission efficiency than friction drive.
  • They can be operated under adverse thermal and atmospheric conditions.
  • It can operate under wet conditions.
Asked By: Daniel Thomas Date: created: Jul 25 2021

What is the advantage of timing belt

Answered By: Gilbert Campbell Date: created: Jul 28 2021

Advantages of timing belt drive
High torque carrying capacity. No slipping between the belt and pulleys. Power transmission at a constant speed. Virtually no creep.

Asked By: Sebastian Ward Date: created: Sep 15 2021

What is the advantage and disadvantage of timing chain

Answered By: Donald Smith Date: created: Sep 16 2021

Timing chain has high strength due to its material and design. The life period of the timing chain is relatively higher than timing belts. The timing chain can resist heat produced from the engine. The timing chain also acts as a damper which dampens the vibration from the crankshaft.

Asked By: Adam Watson Date: created: Aug 18 2021

What are the advantages of gear drive

Answered By: Benjamin Howard Date: created: Aug 19 2021

Advantages of Gear drive

  • It is positive drive hence velocity remains constant.
  • Provisions for changing velocity ratios can be made with the help of gear box.
  • Its efficiency is very high.
  • It can be used even for low speeds.
  • It can transmit high torque values.
  • It is compact in construction.
Asked By: Raymond Watson Date: created: Apr 02 2021

What are the disadvantages of chain drive

Answered By: Donald Edwards Date: created: Apr 05 2021

Disadvantages of chain drives

  • They can not be used where slip is the system requirement.
  • They require precise alignment compared to belt drives.
  • They require frequent lubrication.
  • They have less load capacity compared with gear drives.
  • Their operation is noisy and can cause vibrations.

Asked By: Wallace White Date: created: May 21 2021

What are the advantages and disadvantages of using a belt instead of a chain to power a bicycle

Answered By: David Parker Date: created: May 21 2021

Belt Drive Pros

  • Less maintenance- This is the main reason to make the switch.
  • Belt drives last longer than chain drives- A properly maintained belt drive can last 3-5 times as long as a chain drive.
  • Cleaner- Belt drives require no lubrication.
  • Quieter- Belt drives operate almost silently.
Asked By: Antonio Bennett Date: created: Jul 28 2022

What is the difference between chain and belt drive

Answered By: Daniel Adams Date: created: Jul 29 2022

Summary: 1. Both chain drives and belt drives are methods to transfer power and objects within a machine. The main difference between the two drives is that a chain drive is powered by a chain loop, while a belt drive is powered by a belt.

Asked By: Isaiah Morgan Date: created: May 02 2022

Which of the following are disadvantages of flexible drives

Answered By: Ronald Griffin Date: created: May 03 2022
  • More space required.
  • The velocity ratio is comparatively small.
  • If overloaded, power transmission varys.

Asked By: Jayden Johnson Date: created: Apr 22 2022

What is chain conveyor belt

Answered By: Ronald Harris Date: created: Apr 23 2022

Chain conveyor systems are rugged, durable conveyors used to transport products along a production line. They are suited to many items that wouldn't typically convey on a roller conveyor. Therefore, typical uses are to move pallets, racks, industrial containers and any products with a sturdy lower surface.

Asked By: Noah Parker Date: created: Aug 04 2021

How does a chain conveyor work

Answered By: Isaiah Edwards Date: created: Aug 07 2021

Chain conveyors use an endless chain both to transmit power and to propel material through a trough, either pushed directly by the chain or by attachments to the chain. The chain runs over sprockets at either end of the trough.

Asked By: Howard Parker Date: created: Sep 30 2021

What type of a machine is a conveyor

Answered By: Jesse Richardson Date: created: Sep 30 2021

Vibrating. A vibrating conveyor is a machine with a solid conveying surface which is turned up on the side to form a trough. They are used extensively in food-grade applications to convey dry bulk solids where sanitation, washdown, and low maintenance are essential.

Asked By: William Kelly Date: created: Feb 12 2022

What is Slat conveyor

Answered By: Oscar Robinson Date: created: Feb 15 2022

Slat conveyors consist of endless chains, driven by electric motors operating through reduction gears and sprockets, with attached spaced slats to carry objects that would damage a belt because of sharp edges or heavy weights.

Asked By: Landon Ward Date: created: Jul 20 2022

What are multiple strand chains used for

Answered By: Elijah Flores Date: created: Jul 23 2022

Multiple strand chain is used to provide increased power capacity without increasing the chain's pitch or linear speed.

Asked By: Anthony Young Date: created: Jul 22 2021

How is chain sag measured

Answered By: William Foster Date: created: Jul 25 2021

This can be done by pulling on one side of the chain and rotating the sprockets in opposite directions. On the slack side of the chain drive, place a straight edge from sprocket to sprocket. From the straight edge, measure the amount of sag from the straight edge to the chain (see figure below).

Asked By: Fred Parker Date: created: Jun 17 2022

How much does it cost to replace a timing chain

Answered By: Hunter Kelly Date: created: Jun 17 2022

Timing chain replacement can cost between $600 and $800 for a DIY repair, or between $1,600 and $1,800 with a mechanic. The cost is high due to the complicated nature of replacing this part. If you want to DIY a timing chain replacement, the parts will cost around $650.

Asked By: Howard Nelson Date: created: May 07 2022

Will a broken timing chain destroy my engine

Answered By: Steven Reed Date: created: May 09 2022

If the timing chain breaks, the loose metal rolling around inside the motor can lead to serious engine damage.

Asked By: Nathaniel Gonzalez Date: created: Jul 17 2021

Where is the timing belt used the most

Answered By: Christopher Murphy Date: created: Jul 17 2021

Overhead camshaft engines mostly use timing belts or timing chains, since these are better suited to transferring drive over larger distances.

Asked By: Aidan Jenkins Date: created: Jun 09 2022

How many types of timing belts are there

Answered By: Matthew Hill Date: created: Jun 10 2022

Timing belts are available in two sizes: in metric (millimetres) and imperial (inches) dimensions. The profile of the inner teeth of the belt which goes over the outer teeth of the pulley is the second most important factor. The most common forms are the trapezoidal and round tooth shape.

Related Question Answers

Alan Hayes

Professional

110 bcd crankset

What does BCD stand for?Binary Coded DecimalB. D. (Binary Coded Decimal) The storage of numbers in which each decimal digit is converted into a binary number and stored in a single 8-bit byte. For example, a 12-digit decimal number would be represented as 12 bytes.What does BCD mean on crankset?Bolt Circle DiameterBolt Circle Diameter (BCD) is the diameter of the circle that goes through the center of all of the bolts on your chainring. On bicycle chainrings, this dimension is usually measured in millimeters.What does 110mm BCD mean?Bolt Circle DiameterBCD stands for Bolt Circle Diameter. It is the distance from side to side of a circle that goes directly through each bolt hole in a crankset. ... When you see a measurement like 110 or 130 BCD, that means that diameter is 110 or 130 millimeters, respectively.What does 130mm BCD mean?Bolt Circle DiameterWhat is BCD? BCD stands for Bolt Circle…

Hayden Stewart

Professional

What are the different types of dies?

What are the 3 types of dies?Different Types of Dies ExplainedA shaping tool called a simple die, also referred to as a single operation die, only executes one operation with each press slide stroke.Die compound.Die progressively.Die Combination.Please speak with Standard Die International.How many types of sheet metal dies?Dies, which perform each technique, can be categorized into two types: cutting and forming dies, and are the main components of sheet metal fabrication, a complex manufacturing process used to pierce, punch, bend, and blank metal sheets into a variety of shapes.Feb 20, 2019What are dies in manufacturing?Similar to molds, a die is a tool used in the manufacturing sector to produce multiple components in quick succession. Die types include stamping dies, casting dies, and drawing dies, and they are typically tailored to the particular item theyre used to create.What are Compound dies?Compound dies basically perform one or more operations at the same…

Isaac Cooper

Professional

12 speed manual

Is there such thing as a 12-speed transmission?Developed in conjunction with Eaton, the Paccar Transmission is as smooth of a 12-speed as you can get with an MX engine. The Endurant is available in Kenworth and Peterbilt tractors spec'd with the Cummins X15 engine. Other than some Paccar MX vs. ... Reverse gets two speeds, which also can be selected manually.Is there a 16 speed truck transmission?The 16-speed transmission is a manual transmission that is operated by hand. The transmission features a double-H shift arrangement. The additional reduction allows you to select a total of 16 forward gears and 2 reverse gears.Which cars have a 7 speed manual?What cars have a 7 speed manual?Porsche 911.Aston Martin Vantage.Chevrolet Corvette.Is there a 7 speed transmission?The 7-speed automatic transmission, with its wide range of transmission gear ratios, high speed of shifting, and possibility of manual gearshifts, is a perfect fit for the modern…

Lewis Hughes

Professional

12 speed derailleur

Are 11 and 12 speeds compatible?Condensed answer: A 12-speed chain can work with an 11-speed cassette. However, it's recommended to avoid using a Shimano 12-speed chain because it doesn't play well with 11-speed chainrings.Can I use 10 speed derailleur with 12 speed cassette?-10 speed shifter sets your throw to match the rear cassette. -chains have the same outer dimension, the 12 speed derailleur would have narrower cogs than what required for a 10 speed. -As long as you can set the high/low limits on the derailleur to keep it on the cassette it should be fine.2 Jun 2020Can you combine Shimano and SRAM?Most importantly, YOU CANNOT mix Shimano and SRAM hydraulic brake parts. It's more than a performance issue — it's a safety issue. ... The SRAM rear derailleur (mech) will not work with a Shimano shifter as is; the cable pull and shift activation ratios are not the same…

Angel Jones

Professional

12 speed chain on 11 speed cassette

Can you use a 12 speed chain on an 11 speed?Condensed answer: A 12-speed chain can work with an 11-speed cassette. However, it's recommended to avoid using a Shimano 12-speed chain because it doesn't play well with 11-speed chainrings.Can you use an 11 Speed Quick Link on a 12 speed chain?Condensed Answer: A SRAM PowerLink can be used on a Shimano chain as long as both are designed for the same number of speeds. Some people use PowerLinks intentionally for the convenience that they offer.Will a 11 speed derailleur work with 12 speed cassette?Yes you can run a 9/10/11 & 12 speed cassette on a shimano free hub, a Sunrace 12 speed will fit.Are 11 speed and 12 speed compatibility?A 12-speed chain can work with an 11-speed cassette. However, it's recommended to avoid using a Shimano 12-speed chain because it doesn't play well with 11-speed chainrings.Can I use a 12…

Adam Edwards

Guest

12 speed bike

What does a 12 speed bike mean?On the back, the 12-speed cassette starts at a 10-tooth cog, and increases by 1-tooth per cog. The overall result is that you can reach a higher resistance at the top-end, and your smallest gear is even easier to push.15 Sept 2021Which is faster 11 speed or 12 speed?Since the 12-speed cassette has the same total width as the 11-speed, the space between cogs is narrower. This leads to “faster” shifting since the derailleur doesn't need to move as far to switch gears.3 Nov 2021Is a 12-speed bike good?And thanks to improved materials and tolerances, they're also much more reliable overall, even if they can be a little finicky compared to those 8 and 9-speed systems. 12-speed drivetrains pretty much killed the front derailleur as well, especially after 11-speed showed that maybe we didn't need them after all.16 Jul 2020Why is 12-speed better?Since the…

David Howard

Guest

110 bcd vs 130 bcd

What does 130mm BCD mean?Bolt Circle DiameterWhat is BCD? BCD stands for Bolt Circle Diameter. It is the distance from side to side of a circle that goes directly through each bolt hole in a crankset. ... When you see a measurement like 110 or 130 BCD, that means that diameter is 110 or 130 millimeters, respectively.What does BCD stand for?Binary Coded DecimalB. D. (Binary Coded Decimal) The storage of numbers in which each decimal digit is converted into a binary number and stored in a single 8-bit byte. For example, a 12-digit decimal number would be represented as 12 bytes.What does BCD mean on crankset?Bolt Circle DiameterBolt Circle Diameter (BCD) is the diameter of the circle that goes through the center of all of the bolts on your chainring. On bicycle chainrings, this dimension is usually measured in millimeters.What does 110mm BCD mean?Bolt Circle DiameterBCD stands for Bolt Circle…

Richard Torres

Guest

12 speed cassette on 11 speed hub

Does a 12 speed cassette fit on 11 speed hub?In addition to being able to fit our 12-speed cassettes on Shimano HG 10 and 11 speed freehubs, you can also convert the ROTOR 13-speed cassette into a 12-speed one and use it with your current wheels.Can I use SRAM 11 speed crankset with 12 speed cassette?An 11-speed chain will cause chain rubbing and poor shifting when used on a 12-speed cassette because of the extra width. If your goal is optimal shifting, it's recommended to avoid this combination. Also, an 11-speed chain will accelerate component wear due to the stress on the drivetrain.Can you put a 12 speed cassette on a 11 speed hub?Yes you can run a 9/10/11 & 12 speed cassette on a shimano free hub, a Sunrace 12 speed will fit.Are Shimano 11 and 12 speed compatibility?Of course, the new Ultegra and DURA-ACE wheels come with a…

Harry Mitchell

Guest

12 speed chain on 11 speed

Can you use a 12 speed chain on an 11 speed?Condensed answer: A 12-speed chain can work with an 11-speed cassette. However, it's recommended to avoid using a Shimano 12-speed chain because it doesn't play well with 11-speed chainrings.Can you use an 11 Speed Quick Link on a 12 speed chain?Condensed Answer: A SRAM PowerLink can be used on a Shimano chain as long as both are designed for the same number of speeds. Some people use PowerLinks intentionally for the convenience that they offer.Does Shimano 12 speed cassette fit on 11 speed hub?Yes you can run a 9/10/11 & 12 speed cassette on a shimano free hub, a Sunrace 12 speed will fit.Will a 11 speed derailleur work with 12 speed cassette?Yes you can run a 9/10/11 & 12 speed cassette on a shimano free hub, a Sunrace 12 speed will fit.Will an 11 speed chain work on a…

Howard Davis

Guest

110mm bcd chainring

What does 110mm BCD mean?Bolt Circle DiameterBCD stands for Bolt Circle Diameter. It is the distance from side to side of a circle that goes directly through each bolt hole in a crankset. ... When you see a measurement like 110 or 130 BCD, that means that diameter is 110 or 130 millimeters, respectively.31 Jan 2020What is the smallest chain ring?The AbsoluteBLACK 30t oval chainring is the smallest 104 BCD compatible chainring in the world, and it's taken some clever engineering to make it happen.23 Aug 2016Are smaller chainrings better?The size of a chainring (often expressed in terms of the amount of teeth on it, e.g. a 53t ring) plays a direct role in your bike's gearing, with bigger rings meaning a higher (harder to push) gear and smaller rings a lower (easier to push) gear.What is BCD 130mm?If you're looking at the hole in a crankset, imagine a circle…

Joseph James

Professor

11 speed vs 12 speed

Can you replace a 10 speed cassette with a 12 speed?Although the best option we can offer you, and this is where it makes sense to bet on a 13-speed cassette, is that, by removing the smallest 10-tooth sprocket on a 13-speed ROTOR cassette, you can turn it into a 12-speed cassette and install it without problem on a Shimano HG 10/11sp freehub, so at the beginning you ...Can you use a 12 speed chain on an 11 speed?Condensed answer: A 12-speed chain can work with an 11-speed cassette. However, it's recommended to avoid using a Shimano 12-speed chain because it doesn't play well with 11-speed chainrings.Can you use an 11 Speed Quick Link on a 12 speed chain?Condensed Answer: A SRAM PowerLink can be used on a Shimano chain as long as both are designed for the same number of speeds. Some people use PowerLinks intentionally for the convenience…

Diego Hill

Professor

11 speed dura ace groupset

Is Dura-Ace worth the extra money?In a word, no. Dura-Ace is a little lighter, a little nicer looking (especially the crank). But if your eyes were closed, you couldn't tell the difference between the two riding them. It's not worth the substantial price difference.Is Dura-Ace worth it over Ultegra?Although Dura Ace is considered to Shimano's out-and-out performance groupset, surprisingly, Ultegra is generally deemed to be much more versatile, mainly because of the lower range of gears that it offers. While Ultegra cassettes go all the way up to 34 teeth, Dura Ace cassettes only go up to 30 teeth.Does a Dura Ace cassette last longer than Ultegra?No. The dura ace cassette won't outlast the ultegra. You pay more for dura ace because it weighs less (wank wank).Is it worth upgrading from Ultegra to Dura-Ace?The quality of the Ultegra and Dura-Ace components is almost identical, but Dura-Ace is slightly lighter. If…

Noah Rogers

Professor

110 bcd crank arms

What does BCD stand for?Binary Coded DecimalB. D. (Binary Coded Decimal) The storage of numbers in which each decimal digit is converted into a binary number and stored in a single 8-bit byte. For example, a 12-digit decimal number would be represented as 12 bytes.What does BCD mean on crankset?Bolt Circle DiameterBolt Circle Diameter (BCD) is the diameter of the circle that goes through the center of all of the bolts on your chainring. On bicycle chainrings, this dimension is usually measured in millimeters.What does 110mm BCD mean?Bolt Circle DiameterBCD stands for Bolt Circle Diameter. It is the distance from side to side of a circle that goes directly through each bolt hole in a crankset. ... When you see a measurement like 110 or 130 BCD, that means that diameter is 110 or 130 millimeters, respectively.What does 130mm BCD mean?Bolt Circle DiameterWhat is BCD? BCD stands for Bolt Circle…

Sebastian Powell

Professor

110 bcd chainrings

What does 110mm BCD mean?Bolt Circle DiameterBCD stands for Bolt Circle Diameter. It is the distance from side to side of a circle that goes directly through each bolt hole in a crankset. ... When you see a measurement like 110 or 130 BCD, that means that diameter is 110 or 130 millimeters, respectively.What does BCD mean on crankset?Bolt Circle DiameterBolt Circle Diameter (BCD) is the diameter of the circle that goes through the center of all of the bolts on your chainring. On bicycle chainrings, this dimension is usually measured in millimeters.Are chainrings universal?Oval chainrings are a crucial part of Rotor's business, offering its Universal Tooth design components in both round and oval shapes for all sizes and mounts options.How do I know if my crankset is compatible?2 AnswersMeasure the length of the Bottom Bracket shell. ... Count how many chainrings you have. ... Count the teeth on the…

Geoffrey Richardson

Professor

11 speed ultegra

What year was Ultegra 10 speed?Ultegra switched to 10 speed with 6600 model. Judging by Google, Shimano unveiled the groupset in 2004 and it became available in October 2004.18 Apr 2015When did Shimano introduce 10 speed?Road groupsetsGroupsetDura-Ace2006200720087900 : 10 speed20097970 : 10 speed Di2What is Shimano CS HG?SHIMANO - 10-Speed - HYPERGLIDE - 11-36T MTB Cassette Sprocket. The SHIMANO DEORE has a steel spider and refined tooth profile for HG-X chain and SHIMANO SHADOW rear derailleurs. It delivers precise and consistent shifting performance across a wide range of MTB conditions.Are Ultegra cassettes worth it?Yes, the Ultegra cassette is worth the extra money. No, the Ultegra rear derailleur is not worth the extra money. You can run a 105 rear derailleur on an otherwise Dura-Ace system and not tell the difference.22 Jan 2015What is an 11 speed bike?The latest road groupsets are now 11-speed, meaning the rear cassette has 11 sprockets.…

Sebastian White

User

11 speed to 12 speed compatibility

Does Shimano 12 speed cassette fit on 11 speed hub?Yes you can run a 9/10/11 & 12 speed cassette on a shimano free hub, a Sunrace 12 speed will fit.Will a 11 speed derailleur work with 12 speed cassette?Yes you can run a 9/10/11 & 12 speed cassette on a shimano free hub, a Sunrace 12 speed will fit.Can I upgrade to 1x12?The fairly recent crop of 1x12 drivetrains promises to deliver new levels of performance and a much higher range (more on that later), coupled with the decreased complexity and weight of a 1x drivetrain.Are 11 and 12 speed hubs the same?Both 12-speed setups from SRAM and Shimano share the same sprocket spacings and it's the same with both brand's 11-speed groups. That means that if you want to run a 12-speed Shimano group but don't want to get a Micro Spline hub, you could use a SRAM 12-speed…

Fred Parker

User

11 speed ultegra groupset

Is it worth upgrading from 105 to Ultegra?If you're on a budget, and are just squeaking by, and need to save for it, well, no, it's not really worth it. Shimano does an excellent job of making sure the performance between Dura-Ace, Ultegra, and 105 is pretty much on par. The major difference is weight. Ultegra weighs less than 105 and shifts a bit smoother.Is it worth upgrading to Shimano 105?Tiagra offers excellent value for money but 105 is certainly the better groupset and we'd recommend going for it if your funds allow because of the better brakes, the small weight saving and the upgrade to 11-speed.How many gears does Shimano Ultegra have?The previous version of Shimano Ultegra (6700 series) was available with 20 gears or 30 gears in the form of a triple. However, the new Shimano Ultegra (6800) features 22 gears and as such is upwards compatible with…

Brian Simmons

User

11 speed to 12 speed compatibility shimano

Does Shimano 12 speed cassette fit on 11 speed hub?Yes you can run a 9/10/11 & 12 speed cassette on a shimano free hub, a Sunrace 12 speed will fit.Can you put a 12 speed cassette on a 11 speed hub?Yes you can run a 9/10/11 & 12 speed cassette on a shimano free hub, a Sunrace 12 speed will fit.Are Shimano 11 and 12 speed compatibility?Of course, the new Ultegra and DURA-ACE wheels come with a freehub body that only accepts the new 12-speed cassettes, but your existing 11-speed wheels will accept 12-speed Shimano cassettes no problem!7 Oct 2021Can I use a 10 speed derailleur on a 12 speed cassette?-10 speed shifter sets your throw to match the rear cassette. -chains have the same outer dimension, the 12 speed derailleur would have narrower cogs than what required for a 10 speed. -As long as you can set the high/low…

Mason Adams

User

1 inch headset threaded

Are all threaded headsets the same size?Threaded headset sizes are designated by the outer diameter of the steering column. This can seem confusing, because the head cups do not measure the named standard. The threaded standards are 1 inch, 1-1/8 inch, and 1-1/4 inch headsets. The various standards are generally not interchangeable.How do I know what size my headset is?You will need to measure (in millimetres) the inside diameter (ID) of the top of the head tube (above pic) and the bottom of the head tube (pic below). Measurements are rounded to the nearest millimetre. Example: a tapered frame with a 44mm upper ID and a 56mm lower ID.Can you put a threadless headset on threaded forks?CAN I USE A THREADED FORK WITH A THREADLESS HEADSET? Possibly. ... The steerer protrudes enough above the leading edge of the head tube for the top race, washer, and locknut to comfortably fill…

David Gonzalez

User

11 speed shimano

What is an 11 speed bike?The latest road groupsets are now 11-speed, meaning the rear cassette has 11 sprockets. Experienced riders will change gear frequently to maintain a high cadence. Avoid 'cross-chaining', which means using a small/small or big/big combination, as this puts additional stress on components.When did Shimano introduce 11 speed?The product was introduced to the market in 2010. It comprises four stepped planetary series offering up to 11 speeds.Are Shimano cassettes interchangeable?SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets.Can I put a 11 speed cassette on a 10 speed bike?It will shift fine with a Shimano or SRAM 11-speed system. And in case any of you were wondering, if you have a 10-speed Shimano or SRAM system and buy a wheelset now, you can still run 10-speed cogs on that wheel. To…