## How do you measure a 5 stud pattern

Measure from the center of one stud to the furthest edge of the most opposite stud for uneven stud holes, such as 5 stud patterns, while for even stud holes, like 4 or 6, just measure from the center of one stud to the opposite stud. 29 Sept 2019

## How do I find the wheel PCD

The easiest way to calculate the PCD is as follows:

- Determine the rims or the tires size.
- Measure the distance 'S' between two adjacent studs from the centre of each hole.
- Depending on how many studs you have, you should be able to determine the correct PCD by using the pertinent diagram.

## How do you find the diameter of a pitch circle

The diameter of a pitch circle, also known as a standard circle or pitch circle, is determined by multiplying the number of teeth by the module, or d = zm (where z is the number of teeth and m is the module), and is an important factor in determining where the shafts of two mating gears should be located.

## How do you find PCD of three holes

The easiest way to calculate the PCD is as follows:

- Determine the rims or the tires size.
- Measure the distance 'S' between two adjacent studs from the centre of each hole.
- Using the calculator enter the number of studs/holes & 'S' and press 'calculate'.

## How do you measure PCD flange

MEASURING A STANDARD FLANGE The Pitch Circle Diameter (PCD), which determines whether the flange bolt holes will line up, is one of the most crucial measurements.

## What is the PCD of a wheel

Pitch Circle Diameter (PCD) is the diameter of the circle that passes through the center of all the studs, wheel bolts, or wheel rim holes. The simplest way to calculate the PCD is as follows: 1) Measure the distance “S” between two adjacent studs from the center of each hole.

## What does PCD mean

What Does PCD Stand For? PCD, which stands for Pitch Circle Diameter, is a measurement of the number of wheel nuts or wheel bolts your car has on each wheel and how far apart they are spaced in millimeters.

## How do you measure PCD for 5 studs

Measure “X” from the inside of one hole to the outside of the next hole and multiply by 1.7012 to determine the P.C.D. of a five-stud wheel or hub.

## How do you measure bolt pattern on a tire

8-bolt patterns are measured in a straight line from the center of two bolt holes that are placed directly across from one another. 6-bolt patterns are measured from the center of two bolt holes that are placed exactly across from one another.

## How do you measure trailer wheel size

In this case, if you measure from the center all the way across to the edge of the wheel, it is 4-1/2 inches, so this bolt pattern would be 5 on 4-1/2. To measure it, you would measure from the center of this one wheel all the way across to the edge of the wheel or the hole across from it.

## What is Holden stud pattern size

**Find Your Stud Pattern**

Stud Pattern | Stud PCD | Common Stud Size |
---|---|---|

HQ HOLDEN | 5 x 120.65mm |
7/16″ |

HT HOLDEN | 5 x 108mm | 7/16″ |

LANDCRUISER/NISSAN | 6 x 139.7 | 1/2″ |

LANDCRUISER 100 SERIES | 5 x 150mm | 9/16″ |

## What is the stud pattern on a Ford

**Stud pattern identification**

Type | No. of studs | PCD (inches) |
---|---|---|

HQ Holden | 5 | 4 3/4 (4.75) |

Commodore | 5 | 4.7813 |

Ford Falcon | 5 | 4.5 |

Ford 4 stud |
4 |
4.5 |

## How do you work out the pitch diameter of a circle

The diameter of a pitch circle, also known as a standard circle or pitch circle, is determined by multiplying the number of teeth by the module, or d = zm (where z is the number of teeth and m is the module), and is an important factor in determining where the shafts of two mating gears should be located.

## How do you measure PCD on a flange

MEASURING A STANDARD FLANGE The Pitch Circle Diameter (PCD), which determines whether the flange bolt holes will line up, is one of the most crucial measurements.

## What cars have a PCD of 5×112

A full list of vehicle makes and models appears below:

- (2) U5 (2020-2021) and U6 (2021-2022) routes
- (1) Alfa Romeo (1979–1986) Alfa 6
- BMW (31)
- (6) BMW Alpina
- (5) Bentley
- (5) Borgward
- Magnificence (1)
- Chery (1)

## What cars use 5×114 3 bolt pattern

Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Ceed, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.

## How do you measure 3 holes of PCD

Example 1: Given that the PCD of a three-stud assembly is 258mm, what is the distance between the holes? The answer is H=258xSin60o, or 223.45mm, or 360 degrees divided by three, or 60 degrees.

## What is PCD in alloy wheels

For example, a vehicle with a 5×120 PCD will accept five wheel nuts or wheel bolts, with each spaced 120mm apart. PCD stands for Pitch Circle Diameter and is essentially a measurement of how many wheel nuts or wheel bolts your vehicle has on each wheel and how far apart those nuts or bolts are placed in mm.