Will 11 speed chainset work with 10 speed cassette
An 11-speed crank will perform equally well on a 10-speed system. No one has shown that there is any difference in ring spacing. The chains have the same internal width, so don't know the difference.
Can you convert a 10 speed bike to 11 speed
To upgrade a bicycle to an 11-speed components group requires your existing rear wheel to accept the 11-speed cassette. … Luckily, many common and not-so-common wheelsets, as long as they're at least 10-speed, can be upgraded to 11-speed by purchasing a new cassette body.
Can I use a 10 speed chainring with a 9 speed cassette
A 10-speed chain will work on most 9-speed cassettes without an issue. … Therefore, the chain will move up and down the cogs without skipping or rubbing. However, if your bike has a 9-speed cassette with narrow spacing between the cogs, a 9-speed chain could come off the cog while riding.
Will a 9 speed chainset work with 10 speed
A nine speed crank set will work with a 10 speed drive train. However it's not all plain sailing. You can have trouble using a 10 speed FD with a 9 speed crank set. It doesn't shift as far out as the 9 speed so you may experience sloppy changes to the outer ring and chain rub against the FD in some gears.
Are 10 and 11 speed chains the same
11 speed chains of all the manufacturers are mutually compatible. Since 10 and 11 speed chains are almost the same width, as well as cassette teeth, 10 speed chain can be used in stead of 11 speed one, without it jamming between the sprockets.
Are Shimano 10 and 11 speed compatibility
Shimano's mechanical 10- and 11-speed road shifters are not compatible with its 10- and 11-speed MTB derailleurs. Wolf Tooth's Tanpan adapter solves the incompatibility, though, so riders can potentially make use of cassettes with sprockets as large as 46T.
Can you use a 10 speed chainring on a 9 speed cassette
New Chainrings, Old Chains
And even if you were to experience the problem described, just opt for a 10 spd chain. It'll work fine with your 9 spd cassette.
Will 10 speed chain work with 9 speed cassette
Condensed answer: In most cases, a 10-speed chain will operate just fine with a 9-speed cassette because it's slim enough to move up and down the rear cogs without rubbing or skipping.
Are 10 speed and 11 speed chainrings the same
The spacing between 11-speed chainring teeth centers is not narrower than on 10-speed chainrings. In some cases, it is even a bit wider on 11-speed. So your system will perform pretty much the same as it does now if you were to replace your 10-speed chainrings with 11-speed ones.
Will a 10 speed chainring work on a 9 speed
A 10-speed chain will work on most 9-speed cassettes without an issue. Actually, a 10-speed chain is thinner and lighter than a 9-speed. … All the same, a 10-speed chain can be used on a 9-speed cassette since it is thinner, but there are some caveats you should know.